Manual Machinist Resume Examples and Templates

What do Hiring Managers look for in a Manual Machinist Resume

• Technical Skills: Proficiency in operating manual machine tools such as lathes, milling machines, and grinders to perform precise machining operations.
• Mechanical Aptitude: Understanding of machine mechanics and tooling techniques to set up, adjust, and maintain machinery for optimal performance.
• Attention to Detail: Precision in interpreting engineering drawings, measurements, and specifications to produce accurate machined components.
• Problem-Solving Abilities: Aptitude to troubleshoot machining issues, adjust machine settings, and implement solutions to achieve desired outcomes.
• Safety Consciousness: Commitment to adhering to safety protocols and regulations to prevent accidents and ensure a safe working environment.

How to Write a Manual Machinist Resume?

To write a professional Manual Machinist resume, follow these steps:

• Select the right Manual Machinist resume template.
• Write a professional summary at the top explaining your Manual Machinist’s experience and achievements.
• Follow the STAR method while writing your Manual Machinist resume’s work experience. Show what you were responsible for and what you achieved as a Manual Machinist.
• List your top Manual Machinist skills in a separate skills section.

How to Write Your Manual Machinist Resume Header?

Write the perfect Manual Machinist resume header by:

• Adding your full name at the top of the header.
• Add a photo to your resume if you are applying for jobs outside of the US. For applying to jobs within the US, avoid adding photo to your resume header.
• Add your current Manual Machinist position to the header to show relevance.
• Add your current city, your phone number and a professional email address.
• Finally, add a link to your portfolio to the Manual Machinist resume header. If there’s no portfolio link to add, consider adding a link to your LinkedIn profile instead.

Bad Manual Machinist Resume Example - Header Section

Arturo Miller 308 E. Homewood Lane Westford, MA 01886 Marital Status: Married, email: cooldude2022@gmail.com

Good Manual Machinist Resume Example - Header Section

Arturo Miller Miller, Westford, MA, Phone number: +1-555-555-5555, Link: linkedin/in/johndoe

Make sure to add a professional looking email address while writing your resume header. Let’s assume your name is John Doe - here is a formula you can use to create email addresses:

• firstnamelastname@email.com - johndoe@email.com
• firstname.lastname@email.com - john.doe@email.com
• lastname.firstname@email.com - doe.john@email.com
• f.lastname@email.com - j.doe@email.com
• l.firstname@email.com - d.john@email.com
• firstnamelastname12@email.com - johndoe12@email.com

For a Manual Machinist email, we recommend you either go with a custom domain name (john@johndoe.com) or select a very reputed email provider (Gmail or Outlook).

How to Write a Professional Manual Machinist Resume Summary?

Use this template to write the best Manual Machinist resume summary: Manual Machinist with [number of years] experience of [top 2-3 skills]. Achieved [top achievement]. Expert at [X], [Y] and [Z].

How to Write a Manual Machinist Resume Experience Section?

Here’s how you can write a job winning Manual Machinist resume experience section:

• Write your Manual Machinist work experience in a reverse chronological order.
• Use bullets instead of paragraphs to explain your Manual Machinist work experience.
• While describing your work experience focus on highlighting what you did and the impact you made (you can use numbers to describe your success as a Manual Machinist).
• Use action verbs in your bullet points.

Manual Machinist Resume Example

Top Manual Machinist Resume Skills for 2023

1. Blueprint reading
2. Interpretation of engineering drawings
3. Precision measurement tools usage (e.g., calipers, micrometers)
4. Knowledge of machining processes (e.g., milling, turning, drilling)
5. Setup and operation of manual milling machines
6. Setup and operation of manual lathes
7. Setup and operation of drill presses
8. Tool selection based on material and job requirements
9. Cutting tool geometry understanding
10. Cutting tool sharpening techniques
11. Workpiece holding methods (e.g., vise, chuck, collet)
12. Clamping and securing techniques
13. Workpiece alignment
14. Fixture setup and usage
15. Cutting speed and feed rate calculation
16. Toolpath planning
17. Machining accuracy assessment
18. Surface finish evaluation
19. Deburring techniques
20. Chip control methods
21. Lubrication and cooling techniques
22. Material selection knowledge
23. Material handling and lifting procedures
24. Metalworking fluid management
25. Safety procedures for machine operation
26. Personal protective equipment (PPE) usage
27. Hazardous material handling procedures
28. Machine maintenance and cleaning
29. Troubleshooting machine issues
30. Minor machine repairs
31. Preventive maintenance tasks
32. Shop organization and cleanliness
33. Tool crib management
34. Inventory management of cutting tools and materials
35. Quality control procedures
36. Inspection techniques for machined parts
37. Dimensional tolerance verification
38. Geometric tolerance verification
39. Statistical process control (SPC) usage
40. Documentation of machining processes
41. Communication skills with supervisors and colleagues
42. Teamwork and collaboration
43. Adaptability to changing job requirements
44. Time management skills
45. Problem-solving skills
46. Decision-making skills
47. Continuous learning and professional development in machining techniques
48. Reading and understanding equipment manuals and documentation
49. Training and mentoring of junior machinists
50. Creativity in machining solutions for complex parts

How Long Should my Manual Machinist Resume be?

Your Manual Machinist resume length should be less than one or two pages maximum. Unless you have more than 25 years of experience, any resume that’s more than two pages would appear to be too long and risk getting rejected.

On an average, for Manual Machinist, we see most resumes have a length of 2. And, that’s why we advise you to keep the resume length appropriate to not get rejected.